Reduced magnetic disorder at low temperature in Ca3Co2O6 via zinc substitution

ABSTRACT

The compound Ca₃Co₂O₆ undergoes a transition into a spin-density wave (SDW) state near 24?K. Below ～10?K, this unstable SDW state coexists with a nearly- degenerate commensurate antiferromagnetic state as well as short-range magnetic order. Clear signatures of this strong magnetic disorder have been observed in the response of entropy to changing magnetic field and temperature. We performed a calorimetry study of Ca₃Co₂O₆ and Ca₃Co_1.9Zn_0.1O₆ in order to compare their entropic responses at low temperature. Our results for Ca₃Co₂O₆ reveal that ΔS(T, H)?≡?S(T, H)?S(T, H?=?0) increases as either temperature or magnetic field increase. In contrast, ΔS data for Ca₃Co_1.9Zn_0.1O₆ were relatively unresponsive to changes in temperature or field, suggesting that Zn substitution may reduce the low-temperature magnetic disorder observed in Ca₃Co₂O₆. These results are discussed within the context of two cases (Ca₃Co₂O₆ under applied pressure and Ca_2.75R_0.25Co₂O₆ (R?=?Dy, Lu)) in which a single magnetic ground state is stabilised.     

借助数轴透析金属与盐溶液的反应进程

借助数轴透析“一种金属与溶液中多种盐反应”和“多种金属与溶液中一种盐反应”中溶质与滤渣的组成,直观地将反应进程和结果展现其中,建立思维模型,化难为易,有利于学生掌握与应用。     

Thin film photocatalysis for environmental remediation: A status review

This review accounts, various metal oxide and metal sulfide thin films available for photodegradation of several organic compounds. Due to difficulties in recycling and to avoid rigorous recollection of powder catalysts, the thin film catalyst are gaining rapid attention for photocatalytic applications. The semiconducting thin films are growing as promising photocatalyst for water treatment. This review focuses mainly on the photocatalytic activity of metal oxide thin films in terms of its stability, charge transport and absorption properties. Thin film photocatalyst provides the increased efficiency and cost reduction of device. Furthermore, this review summarizes some key factors regarding the enhancement in photocatalytic performance of thin films.     

Asymmetric Three‐Component Heck Arylation/Amination of Nonconjugated Cyclodienes

Substituted cyclohexylamines are becoming increasingly important in drug discovery. Asymmetric Heck insertion/amination of nonconjugated cyclodienes proceeds to give 5‐aryl cyclohexenylamines with good enantioselectivity and exclusive trans configurations. Primary and secondary anilines, indoline, and benzylamines are suitable amines. The weakly donating diphosphite Kelliphite forms a deep unsymmetrical pocket, which is essential for stereoselective anti attack of amines.     

Laser control of magneto-polaron in transition metal dichalcogenides triangular quantum well

We study the dynamic of magneto-polaron condensate in monolayer two dimensional (2D) transition metal dichalcogenides (TMDs) materials of 2H types in triangular quantum well potential. Within both the quantum mechanical Schrödinger approach (QMSA) and the improved Wigner-Brillouin theory (IWBT), Landau energies levels (LELs) are derived. We have shown that the magneto-polaron condensation is enhanced in monolayer MoSe₂ compared to MoS₂, WS₂ and WSe₂. We derive various levels by increasing a magnetic field and laser parameter. We show that the quantum confinement lifts the degeneracy of the Landau levels (LLs) resulting in an anticrossing and crossing. The dephasing effect due to the quantum well potential's parameter plays an important role in the magneto-polaron energy corrections, which are also affected by the amplitude of the laser field. The system presents Stückelberg oscillations which is important for practical applications.     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

Rare-earth metal derivatives supported by aminophenoxy ligand: Synthesis,characterization and catalytic performance in lactide polymerization

A library of rare-earth metal derivatives supported by an aminophenoxy ligand was prepared and their catalytic performance in lactide polymerization was investigated. It was found that the synthetic strategy had a profound effect on the formation of aminophenoxy rare-earth metal complexes. Amine elimination between Ln[N(SiMe₃)₂]₃(μ-Cl)Li(THF)₃ (Ln = Yb, Y) and 1 equiv. of the aminophenol [HONH] ([HONH] = ο-OCH₃-C₆H₄NHCH₂(3,5-^tBu₂-C₆H₂-2-OH)) in toluene gave the unexpected heterobimetallic bis(aminophenoxy) rare-earth metal complexes [ON]₂LnLi(THF)₂ (Ln = Yb ( 1 ), Y ( 2 )). When the reactions were carried out in THF and TMEDA, amine elimination produced the aminophenoxy rare-earth metal amide complexes {[ON]LnN(SiMe₃)₂}₂ (Ln = Yb ( 5 ), Y ( 6 )) in ca 85% isolated yields. Complexes 5 and 6 could also be obtained from salt metathesis reaction of {[ON]LnCl(THF)}₂ (Ln = Yb ( 3 ), Y ( 4 )) with NaN(SiMe₃)₂ in a 1:2 molar ratio. In addition, treatment of complexes 3 and 4 with NaOAr (Ar = &bond;C₆H₄-4-^tBu) and (SiMe₃)₂NC(NPrⁱ)₂Na in 1:4 and 1:2 molar ratios provided the corresponding aminophenoxy rare-earth metal derivatives {[ON](μ-OAr)Ln(μ-OAr)Na(THF)₂}₂ (Ln = Yb ( 7 ), Y ( 8 )) and {[ON]Ln[(ⁱPrN)₂CN(SiMe₃)₂]}₂ (Ln = Yb ( 9 ), Y ( 10 )), respectively. These complexes were fully characterized, and their molecular structures were determined using single-crystal X-ray diffraction. Polymerization experiments showed that complexes 1 , 2 , 5 , 6 , 9 and 10 were highly active for the ring-opening polymerization of l -lactide in toluene, and complex 1 promoted l -lactide polymerization in a controlled fashion. The polymerization of rac-lactide initiated by the neutral aminophenoxy rare-earth metal complexes 5 , 6 , 9 and 10 in THF afforded heterotactic polymers.     

SCR performance enhancement of NiMnTi mixed oxides catalysts by regulating assembling methods of LDHs-Based precursor

A series of NiMnTi mixed metal oxides (Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO, NiMnTi-LDO) were synthesized via different assembling methods and evaluated in the selective catalytic reduction of NO_x with NH₃(NH₃-SCR). As the results presented, catalysts via diverse assembling methods of LDHs templates afforded different catalytic denitrification (DeNO_x) performance, which might be related to the exposure degree of active constituents and the interaction intensity between metal components. Noticeably, compared with Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO catalysts, the NiMnTi-LDO catalyst deriving from one step in-situ method NiMnTi-LDH precursor template exhibited the most desirable performance at temperature window of 150–360 °C in NH₃-SCR (above 90% NO_x conversion with 95% N₂ selectivity). The specific structure and property of samples were correlated by means of a series of characterizations, where the results indicated that NiMnTi-LDO possessed the highest surface area, the strongest redox ability, the most abundant acid amount and the best dispersion.     

Intramolecular orbital engineered hetero bimetallic Ce-Fe MOF with reduced transition energy and enhanced visible light property

A structurally stable, 3d-4f heterometallic coordination polymer has been solvothermally synthesised and evaluated for its accomplished materials properties. The light absorption activity in the visible band was higher for unique Ce-Fe MOF than that of the homometallic Ce-MOF or Fe- MOF. The intimate overlap of two different metal clusters in heterometallic environmental induced the formation of low line conduction orbital, which ultimately lowered the transition energy. The heterometallic acquired an additional sensitisation from a Fe-μ3-oxo cluster that had vibrantly enhanced the light uptake activity. The vacancy created in the 6s, 5d orbital of Ce in Ce-Fe MOF contributed to the photo-excitation of electrons and reduced the recombination time. This distinct intramolecular arrangement assisted the exciton trapping characteristic. Also, the presence of multiple metal cores in the framework aided to confine the increased number of excitons for a redox reaction. The solar photocatalysis study with acetaminophen revealed these improved materialistic features by degrading it 94.6% with a rate constant of 0.0137 min⁻¹. The recycle studies confirmed the robust stability of the synthesised MOF.     

Ni(II) and Cu(II) complexes of bidentate thiosemicarbazone ligand: Synthesis,structural, theoretical,biological studies and molecular modeling

The conventional condensation and refluxing process was employed to synthesize Ni(II) and Cu(II) complexes of Methylcarbamatethiosemicarbazone ligand. Reactions were carried out at the pH of 7. The molar ratio of the ligand and metal salt was 2:1. The structures of the synthesized metal complexes were suggested by different analytical techniques such as magnetic susceptibility, molar conductance, IR, EPR and UV spectroscopy. Experimental studies confirmed the octahedral geometry for all the complexes. The geometry of the ligand and complexes were also confirmed by theoretical studies. The complexes were investigated for biological action against pathogenic fungi (C. krusei, C. albican) and bacteria (S. aureus, E. coli). The antimicrobial results confirmed superior inhibition potential of the metal complexes as compared with the parent ligand. The enhanced antimicrobial activities might be due to the chelation. Molecular-docking assays confirmed the strong interaction of ligand with target antimicrobial protein DNA gyrase-B.